COPYRIGHT © 2019 SHIRE GROUP  ALL RIGHTS RESERVED.   苏ICP备16023539号-2  Powered by www.300.cn

Products            Performance            Introduction            News            Contact

SHIRE GROUP

Address: No.1 East Dianxin Road, Rugao, Jiangsu - SHIRE INDUSTRIAL PARK

E-mail:shire@shire-tech.com

Tel:(+86)513-87875566
Fax:(+86)513-87998966/4008280862

 

400-828-0862

参与所有特高压直流重点工程

+

江苏世睿集团有限公司系国家高新技术企业,江苏省民营科技企业。自成立始,公司从高分子新材料的研究出发,积极向下游延伸,形成从材料、零件、部件、方案设计到工程服务的产业链组合。

集团下设四个子公司,形成“四类产品+工程服务”五大业务,其中四类产品为高分子新材料及制品、胶布类制品、特种橡胶制品和智能储油柜。世睿为全球电力、轨道交通、高端诊疗设备和通讯等行业提供国际领先的产品、解决方案和服务。

凭借集团产业链组合与行业资源共享的优势,世睿将持续聚焦客户关注的难题,以精湛技术和尽心服务赢得所涉足业务领域的领先地位,为相关方创造最大价值。

全球400余家客户长期批量合作

20
30
400
1000

20余家国家及地区的应用

国内30余家省市自治区使用全覆盖

+

+

集团简介

+

Power equipment sealing special glue

没有此类产品
Features
Product advantages
Product value
Application field
The special glue for power equipment sealing is a new high-performance caulking sealing material developed by Shirui Group's Hengrui Polymer Research Team. The material is based on polymer elastomer, adding reinforcing filler, flame retardant and other functions. The agent is obtained by kneading and extruding. Has the following characteristics:
 
1. Excellent sealing performance
 
The special glue for power equipment sealing has good flexibility, can withstand a certain degree of displacement and deformation, and has excellent sealing performance.
 
2. Excellent waterproof performance
 
The special glue for power equipment plugging will not dissolve or leak when it is water droplets or soaking, and it has excellent waterproof performance.
 
3. Excellent insulation performance
 
The main component of the special glue for power equipment sealing is synthetic rubber elastomer, which has good insulation performance.
 
4. Excellent flame retardant performance
 
The special rubber flame retardant grade of power equipment plugging reaches the highest flame retardant grade FV-0 of polymer materials, and the flame retardant performance is excellent.
 
5. Excellent aging resistance
 
Hengrui Power Equipment Sealing Special Adhesive has high elasticity, large elongation and deformation, large recovery range, high aging resistance with high temperature and no drooling, and low temperature and no brittle fracture.
 
6. Excellent safety and environmental protection
 
Hengrui Power Equipment Sealing Special Glue is solvent-free, odorless, non-toxic, non-corrosive, and can be used repeatedly and not cured for life.
Corresponding parameter set not found, please add it in property template of background
Hengrui power equipment sealing special glue sets the five properties of sealing, waterproof, insulation, flame retardant and anti-aging. It completely solves the problem of aging and falling off of fireproof mud, and its performance is more advantageous.
 
1. Compared with fireproof mud, it is more resistant to aging and has a longer life.
 
The traditional fireproof mud is not resistant to high temperature aging. Under high temperature conditions, it is prone to discoloration, hardening and cracking, and even powdering occurs in long-term operation. Hengrui Power Equipment Sealing Special Glue has good anti-aging properties at high temperature and no stagnation at low temperature, and does not cause shrinkage and cracking in long-term high temperature environment.
 
2. Compared with fireproof mud, it is more resistant to water and does not dissolve.
 
The traditional fireproof mud material is easily cracked when it is soaked in water, and there will be dissolution and water leakage under the action of rain water. Hengrui Power Equipment Sealing Special Adhesive has excellent waterproof performance and can maintain adhesion to metal, cable sheath and other materials under rainwater immersion.
 
3. More insulated and safer than fireproof mud
 
According to GB/T 1695 and GB/T 1692 standard test, the dielectric strength of special rubber for blocking power equipment of Hengrui Power Equipment reaches 28kV/mm, which is much higher than 23.6kV/mm of fireproof mud; the volume resistivity reaches 6×1015Ω•m. About 20 times that of fireproof mud.
 
4. More sealed and longer lasting than fireproof mud
 
The test proves that the sealant is prone to cracks, hardening and loss of sealing performance during long-term operation, while the special glue for sealing the Hengrui power equipment can maintain permanent flexibility and adhesion, and the sealing performance is not affected. At the same time, the special glue for sealing is convenient to construct, has high utilization rate, can be used repeatedly and does not cure for life.
1. Thoroughly solve the problem of aging and falling off of fire-resistant mud materials in substation, and ensure the safety of power grid.
 
Hengrui power equipment sealing special glue sets the five performances of sealing, waterproof, insulation, flame retardant and anti-aging. The performance and life are completely beyond the fireproof mud, completely eliminating the safety hazard caused by the aging of the fireproof mud and the sealing failure. Long-term protection of the safe operation of the grid.
 
2. Convenient construction, reuse, and full life cycle cost.
 
Compared with fireproof materials such as substation fireproof mud, Hengrui power equipment plugging special glue construction is convenient, easy to disassemble, can be used repeatedly and does not cure for life, so it is more intensive to the owners throughout the life cycle.
 
3. The use of years of commitment is guaranteed
 
Hengrui power equipment sealing special glue can guarantee ten years of service life, quality problems appear within ten years, Shirui replacement package compensation!
1. Blocking of terminal boxes and mechanism boxes of various voltage levels in substations;
 
2. The outdoor cable of the substation enters the hole of the main control room and the hole of the outlet of the 10kV cable trench;
 
3. Blocking of wires and cables through holes in power plant, industrial and mining enterprises, high-rise buildings, shipbuilding, metallurgy and other systems engineering;
 
4. Sealing and seepage prevention at structural joints such as underground facilities, tunnels, water supply and drainage works, and culverts;
 
5. Sealing at the treatment tank, sedimentation tank and pipe joint;
 
6. Other occasions where sealing, plugging, and caulking are required.
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article

POLYMER MATERIAL PRODUCTS